Author |
Message |
Ros
| Posted on Friday, March 04, 2011 - 05:24 am: |
|
Because the official dealers suck in Spain, they don't want to tell any ref/part number, anyone can check if this part number is right for a 1125 CR 2010 speedometer? Y0500.2AM (this number cames from a 2009 parts manual) Thanks |
Froggy
| Posted on Friday, March 04, 2011 - 10:29 am: |
|
Correct, but I believe it was superseded to Y0500.2AMA (Message edited by froggy on March 04, 2011) |
Ros
| Posted on Friday, March 04, 2011 - 11:24 am: |
|
Froggy, I found this... "2010 model year instrument cluster will not retrofit back due to hardware change for new turn signals" So Y0500.2AMA is for 2009 model and the Y0500.3AMA for the 2010 model? , so that's the ref I need, wow man it's so complicated, and with our non collavorative HD dealers, sucks... I don't know if this issue about part number silence with the dealers happens in the States, if not lucky people you are. thanks |
Froggy
| Posted on Friday, March 04, 2011 - 11:30 am: |
|
Sorry, didn't see that you needed a 2010 cluster. Yes you want Y0500.3AMA |
Ros
| Posted on Thursday, March 10, 2011 - 12:34 pm: |
|
Froggy You know the difference between Y0500.3AMA and Y0500.3AM?? |
Froggy
| Posted on Thursday, March 10, 2011 - 01:14 pm: |
|
.3AM is obsolete, you can only get .3AMA now. The new one has slightly different programming to prevent an issue with it displaying a low fuel light and check engine light when driven in below freezing temps. (Message edited by froggy on March 10, 2011) |
Ros
| Posted on Thursday, March 10, 2011 - 01:17 pm: |
|
You mean the .3AM is obsolete right? and the correct one is .3AMA |
Sportster_mann
| Posted on Monday, March 14, 2011 - 04:02 pm: |
|
Ros said -
quote:Froggy, I found this... "2010 model year instrument cluster will not retrofit back due to hardware change for new turn signals"
I doubt that is true as the 2010 turn signals will retrofit to earlier models - they work with no issues as I have swapped them on my 2008 R. |
Ros
| Posted on Monday, March 14, 2011 - 04:13 pm: |
|
Wow just ordered the Y0500.3AMA!! I hope it works right :/ !!! |
Froggy
| Posted on Monday, March 14, 2011 - 05:11 pm: |
|
Put 2008 turn signals on a 2010 bike and tell me what happens. Also, disconnect one of your turn signals see if the other one will flash fast or not. The difference between the two years was the change from LED to incandescent bulbs, so the programming in the cluster was changed so it can correctly detect when you have a signal out. Ros, you will be fine. |
Ros
| Posted on Monday, March 14, 2011 - 05:41 pm: |
|
Thanks dude!!! I'm a newbee in parts/mechanics and the non-usefulhelp of Spanish dealers didn't help!! Thanks again, when I replace the speedo I'll tell how it works and if can do it myself. If you never visit Barcelona you have a beer!! |
|