| Author | Message | ||
     Homer007 |
I'm going to bring my CR to a trackday once the stator issue is resolved. Does anyone know how to disconnect the mirrors? I removed the single bolt but there's a wire going somewhere on it. How do I unplug this this wire? | ||
| Andros |
under the front windscreen. | ||
| Puredrive |
take apart the front windscreen. Unplug the wires..and then Unscrew the Big Bolts. Done! | ||
| Dannybuell |
As Andros said. It is so easy you won't believe it. 1. might have to cut a zip tie or two. 2. The torx shoulder bolts holding the flyscreen 3. the Male-Female plugs. :-) | ||
| Homer007 |
all responses appreciated. one more question; how do i get the headlight to turn off? i will need to tape it up and i rather not have it melt the tape residue. removing the fuse for the headlight also disables the bike. do you guys just unplug it? | ||
| Brumbear |
use painters tape and no worries | ||
| Dktechguy112 |
You could look for an old headlight assembly on ebay, i am going to use my old headlight assembly for the track, it got smashed up in a wreck, so i can just tape it up and not worry about it. I am pretty sure the bike will run with the headlight unplugged, so you can just tape it and unplug it. |
