G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Marks3tbillet Posted on Sunday, May 23, 2010 - 09:21 am:        I have the engine rotated in my '07 Uly to fix rocker box leaks. I bought the 17036-91A kit that is mentioned in the Knowledge Vault. There are updated sealing washers for the outer cover bolts. Do you maintain the washer that is on the factory bolt and put the new part under them? I'm asking because the factory washers are captured on the bolts. Thanks for any help, Mark   Reepicheep Posted on Sunday, May 23, 2010 - 10:22 am:        Good question. Seem reasonable to just add the new washers under the existing captive washers.   Marks3tbillet Posted on Sunday, May 23, 2010 - 11:08 am:        The reason I ask is the new part actually has a washer with an o-ring type seal molded into its inner diameter. I didn't have any leaks at the top cover bolts so it's not a big deal. The BIG leak was at the rear between the upper and lower covers.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: