G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Big, Bad & Dirty (Buell XB12X Ulysses Adventure Board) » Archive through May 06, 2010 » Archive through April 15, 2010 » Broken Belt and Spring Belt Tensioner « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Gamdh
Posted on Monday, April 05, 2010 - 07:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Leaving the house this morning, go over the speed table and as the rear wheel comes of .. the belt breaks.

There have been some questions relative to belt life and the spring loaded tensioners.

This is what I have....


@36,412 mi New Drive Belt and Free Spirits Belt Tensioner

@49,954 mi 2010 Rear Wheel (probably not relevant?)

@53,860 mi Belt Broke

So, with the original belt and stock tensioner I got 36,412mi. The belt did not break. I replaced it as preventative maintenance.

I put the spring tensioner on with a new belt... 17,488 miles on this setup before the belt failed.

Pretty consistant riding style.

Oh and a big thanks to Bumpus.. a new belt is on the way. I got their last one.. they appear to be back ordered until April 29.

(Message edited by gamdh on April 05, 2010)
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Monday, April 05, 2010 - 07:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Good to know of your experiences. Thank you : )
Top of pagePrevious messageNext messageBottom of page Link to this message

Jessemc
Posted on Monday, April 05, 2010 - 07:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Gamdh -I put the sspring tensioner on with a new belt... 17,488 miles on this setup before the belt failed.

Was this another '06/first generation Ulysses belt?
Top of pagePrevious messageNext messageBottom of page Link to this message

Gamdh
Posted on Monday, April 05, 2010 - 07:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

No, it was an updated version at the time...G0500.1AKE. Which is now superseded by the 'F'.
Top of pagePrevious messageNext messageBottom of page Link to this message

Idaho_buelly
Posted on Monday, April 05, 2010 - 11:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Great info..Thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Tuesday, April 06, 2010 - 08:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thank you for posting the data.

Curious - and not to point fingers or anything, just trying to get a full picture...did the belt get tweaked at all during the wheel swap? Or possibly during an intermittent tire change? I know they don't like being folded/bent and sometimes it's hard to thread the wheel/pulley out of there without catching the belt...

Good info though, thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Gamdh
Posted on Tuesday, April 06, 2010 - 10:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Rat.. nope.. I do all the wheel removal/replaces myself. So, I would know if anything out of the ordinary occurred with the belt. (and would be the first to admit if I'd done something stupid )
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbimmer
Posted on Tuesday, April 06, 2010 - 10:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Great... I just put on a new "E" belt. Maybe there's a reason they went to a "F".
Top of pagePrevious messageNext messageBottom of page Link to this message

Skinstains
Posted on Friday, April 09, 2010 - 11:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Chain conversion...
Top of pagePrevious messageNext messageBottom of page Link to this message

Crusty
Posted on Saturday, April 10, 2010 - 06:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I hated belts, so I put a chain conversion on my M2. 10,000 miles later, I went back to a belt. The chain was maintenance intensive, made a mess of the side of the bike from chain lube and had to be left ridiculously loose, because it would tighten up a lot as the swingarm moved up. It was worn out in only 10,000 miles, and the kit cost as much as a belt and both sprockets, especially since I had to replace the crap Diamond chain that came with it for a good quality O-ring chain.
At 53,000 miles, I'd recommend changing out the sprockets along with the belt. A worn sprocket can shorten a belt's life significantly.
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Saturday, April 10, 2010 - 07:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

+1 on what Crusty said.
My rear pulley on my X1 was worn out and I just slapped a new belt on.
It only lasted 12,000 miles.
The chrome had peeled off mostly and the soft chewy caramel center of the pulley had worn down.
I'll know for sure once the new belt has more miles.
The last belt didn't snap but had all the teeth scrape loose. odd eh?
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration