G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Buelldad Posted on Wednesday, June 24, 2009 - 10:57 pm:        will the early xb crank interchange with the new style (late style crank in an early xb or even the s1 type cases ?? i see that the Lh side of the crank uses a bolt & the shaft is shorter because of this type not using a nut setup ( from what ive learned the stator setup is supposed to swap on all thanks   Rotor Posted on Saturday, June 27, 2009 - 02:40 am:        i'm also looking for this information, i'm planning to put a 09 xb12 crank on 05 xb9sx cases   Alessio66xb12r Posted on Thursday, July 02, 2009 - 11:06 am:        is possible if you change cases bearings stator .... somebody did it here in the past   Phelan Posted on Monday, August 24, 2009 - 10:57 am:        There's a good bit of machining required to get an XB crank into Tuber cases but I can't remember what all it took to do so. I found this out from someone on here using XB9 cranks in tuber race bikes.   Buelldad Posted on Saturday, January 16, 2010 - 02:05 am:        im lookin to go the other way --xb cases with a tuber crank --any help ??

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: