|Posted on Wednesday, May 23, 2018 - 04:17 pm: ||
I found a set of the 1"drop pegs on Ebay from Liquid Performance and purchased them for the SX. I thought they were the same as the lowered Black Lightening version, but I could be wrong! I've mounted them no problem. however I'm out of adjustment on the brake side with the pedal still to high to be able to brake. Since it's not often I use the rear except in extreme braking when idiots pull in front of me! LOL
I'm wondering if there is a different hardware required to mount these with. Since there isn't any manual on the Black Lightening version of the SX I have no idea!
Any help is appreciated!
|Posted on Thursday, May 24, 2018 - 11:36 pm: ||
Hardware is the same but the best way to fix the brake pedal issue is to remove the master cylinder and cut 1/8-3/16" off the adjustment rod and reinstall it, to get a proper brake pedal angle. I have 1" drop pegs on mine and found there is not enough adjustment in the rod to properly reposition the pedal as is.