|Posted on Monday, March 07, 2016 - 08:17 pm: ||
I upgraded to Baker 1125R HD springs, which I was under the impression was going to be an upgrade.
Is there a seperate spring just for the 1190's?
I'm getting major slip in 3rd gear WTFO.
Dean Adams exhaust
|Posted on Monday, March 07, 2016 - 08:18 pm: ||
I took it apart, inspected plates, and installed IAW the 1125R manual.
Steel plates machined side facing inward, last friction plate offset on mounting teeth.
|Posted on Sunday, March 13, 2016 - 09:36 pm: ||
1st steel plate faces the other way. I have no clue why I didn't see it in the 1125 manual, but it is in the 1190 manual.
Slip is no more.
And a word of warning, the Barnett's 1125R clutch springs are softer than the 1190 comfort kit springs. I read in a few sources otherwise, and took their word for it.
I guess if you don't plan on giving it full throttle past 2nd gear, or if you weigh less than 180 pounds, it shouldn't be a problem.