Author |
Message |
Mikey85
| Posted on Sunday, December 26, 2004 - 04:31 pm: |
|
2000 S3. I bought the bike used and it had the D&D and race chip. It was running very rich when I got it. I have recently repacked the muffler and put exhaust torque cones and it help quite a bit. It still runs a little rich, is there anything I can do to fix that? THANKS |
Buells Rule! (Dyna in disguise)
| Posted on Sunday, December 26, 2004 - 04:38 pm: |
|
Have the TPS reset is about all you can do with it in this configuration. Or you could add a Power commander & with a good map you could dial it in properly. But beware that plenty of folks have had interface issues with the PC on the Buells. For some they work great & for others they could never get it working properly. |
Buells Rule! (Dyna in disguise)
| Posted on Sunday, December 26, 2004 - 04:39 pm: |
|
PS..you could always loosen the bolts for your intake manifold, that will lean her out pretty good. PS2..dont do that tho. |
Mikey85
| Posted on Sunday, December 26, 2004 - 04:40 pm: |
|
I actually have had the tps reset |