G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Bluelightning Posted on Wednesday, September 15, 2004 - 01:46 pm:        I looked in the KV, but couldn't find the answer. Does anyone know the proper torque values when installed a new front isolator? I'm talking about the rubber piece that mounts on the frame that the front mount hangs from. I must be blind and can't find it in my service manual anywhere. Thanks!!   Loki Posted on Wednesday, September 15, 2004 - 02:24 pm:        Blue, The big bolt gets 100-110 ft lbs the smaller side bolts are the same These numbers are in the engine section of the manual.   Bluelightning Posted on Thursday, September 16, 2004 - 08:24 am:        Yeah, I found the main bolt, but I couldn't find the 2 side bolt numbers. Thanks!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: