G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   The_x_man Posted on Tuesday, May 11, 2004 - 12:46 pm:        Do you tighten the bolt that goes through the upper Triple Clamp with a certain torque ???   Ray_maines Posted on Tuesday, May 11, 2004 - 06:56 pm:        yes   Dyna Posted on Tuesday, May 11, 2004 - 09:56 pm:        Tighten it till it strips, then back off exactly 1/4 turn.   Newfie_buell Posted on Tuesday, May 11, 2004 - 10:17 pm:        There is a procedure that must be followed. Check the online S1 Manual in the Knowledge Vault. I can't imagine it being any different than the S1. You have to use a spring scale.   99buellx1 Posted on Wednesday, May 12, 2004 - 12:06 pm:        I see a service manual in your future. Way worth it. Craig Buell Cycle Center

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: