G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mfell2112 Posted on Sunday, April 04, 2004 - 03:02 pm:        Is there a good way to repair this? The tail is off a 97 or 98 M2. Too bad this thing is riveted on then again most likely it would be darn near impossible to replace. I was thinking of having it plastic welded. regards Mike   Bartimus Posted on Sunday, April 04, 2004 - 03:25 pm:        you got any pics of the damage?   Richieg150 Posted on Sunday, April 04, 2004 - 09:59 pm:        I repaired a plastic lower on my M2,with DURAMIX 4040.You can get it at an auto body supply store.I think it was 75$.It takes a special gun to use it,I was able to use one of the guns from the body shop,after leaving a deposit.Brought the gun back the next day and got my deposit back.Its good stuff,repair it,sand it down,then paint or whatever.   Mfell2112 Posted on Monday, April 05, 2004 - 01:40 am:        I will get some pics up on Monday. Regards Mike   Bomber Posted on Monday, April 05, 2004 - 01:56 pm:        Mike I used PC-7 (usually used to repair steering wheels) in customizing the same area of my M2 slim tail section . . . it's a might heavy, but it's still in one piece after a summer and 8k miles

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: