G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pangalactic Posted on Monday, March 29, 2004 - 03:28 pm:        Has anyone attempted to put a Firebolt frontend/headlamp assy onto a tuber, ala Neil's infamous X-3? Is it possible without too much fabrication? Just thought it would be an interesting look...the square headlight on my S3 is a little dull looking ever since the xb's came out... Pang   Spiderman Posted on Monday, March 29, 2004 - 03:57 pm:        I did this to my M2 An it wasn't easy. Mounts need to be fabricated, an Bars were a problem so I used a S2 front end so I could put clip ons on the top of the clamps.   Pangalactic Posted on Monday, March 29, 2004 - 05:30 pm:        I have to admit, that does look pretttty slick...   Xbvictor Posted on Monday, March 29, 2004 - 07:50 pm:        That does look sharp.   Spiderman Posted on Monday, March 29, 2004 - 09:38 pm:        here are some close ups   Blackbelt Posted on Tuesday, March 30, 2004 - 09:49 am:        yeah but when the front end fell off on I-75 at 80 MPH.. hehehe joking it never did that..

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: