G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Birdy Posted on Tuesday, June 09, 2009 - 05:52 pm:        These are the front brackets off the Hepco & Becker mounts and the unpainted one is the one I made. This is only needed for a Lighting Long (XB12Ss, Xb12Stt style Buells) Notice that the things are made of heavy gage steel 5mm or 6 gage. I cut mine at work and then ran it through the press. You can see the holes are in different locations than the factory ones and I'll have to cut the Cam-loc plates off and weld them on my brackets BUT it's do-able!   Crusty Posted on Wednesday, June 10, 2009 - 06:29 am:        Yes, it's do-able That's my wife Terri's Ss. The brackets I made aren't quite as pretty as yours, but they work well.   Natexlh1000 Posted on Wednesday, June 10, 2009 - 11:55 am:        Is that the parking lot at the border of Massachusetts and New York on route 2?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: