G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mikexup Posted on Wednesday, February 11, 2004 - 05:45 pm:        Hello Everyone, The screws holding the shield on a 2001 S3, are they a metric size or is special tool needed to remove them? Any of the allen wrenches I have are either a little too big or small. Thanks   Dynarider Posted on Wednesday, February 11, 2004 - 09:00 pm:        Those are pop rivets Good luck finding the right sized wrench. Just kidding, I have no idea if they are metric or not. Wouldnt suprise me tho.   Uwgriz Posted on Wednesday, February 11, 2004 - 11:22 pm:        The pop rivets on my '02 use a 3/32" allen wrench.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: