Author |
Message |
Cyclonemick
| Posted on Tuesday, March 31, 2009 - 08:56 am: |
|
I posted this in KV but no reply's so I figured I would try here! While working inside my primary this past weekend because of a bad shaft seal and bad spring plate I noticed something that appeared off! On the right side of the Detent plate is a small hole, Behind the Hole to the left is a small metal dowell that looks as if it should go into the hole in the Detent plate? Is that correct?? I have had some second gear issues and was wondering if this may be the culprit?? |
|