| Author | Message | ||
     Mfell2112 |
Hello all, I want to use the FB tailight and sigs on my 2000 Cyclone. Anybody ever try this? I like the look of the FB sigs better then my stock ones. Also what are the diffferences between the newer X1 sigs and the FBs? Thanks Mike | ||
| Bads1 |
Nothing you can use the signals but not the tailight. | ||
| Bluzm2 |
Mike, What Bad said. I have X1 signals on my M2 and on my S2. I used rear signals for both front and rear. The front ones have longer mounting stems, I didn't want them sticking out that far. You will need to elongate the the mounting hole in the front headlight mounts to clear the headlight bucket. I used die grinder and "slotted" the hole avout 1/4" - 3/8". Just purchase 2 L Rear and 2 R Rear lights. Mount a R Rear on the L front. If you look closely you will see a drain slot on the bottom of each lense. Obviously these should be mounted on the bottom. The rears will bolt right on. They hold up MUCH better than the stock units due to the flexible rubber stem. Bulbs last longer too! Plus they are cheap! Around $7.50 each. |
