G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   P47b Posted on Saturday, April 19, 2008 - 04:05 pm:        Can you all post me some pictures of you plate relocation on your bike. I am going to start casting ones for XB9R. I think I might be able to do it without drilling holes in the under pan by using the existing screws that are there. Just some ideas.   Deadduck Posted on Sunday, April 20, 2008 - 12:40 am:        I just cut up the stocker, bent it in a couple of locations and used the existing screws in the belly for the relocation. the entire process took about 30 minutes. I'll post you up some pics tomorrow   Lonexb Posted on Sunday, April 20, 2008 - 07:32 am:        this can be done the same way on the firebolt tail. IMO the cleanest look. brian   Deadduck Posted on Sunday, April 20, 2008 - 07:23 pm:        come to find out my wife took the camera to the office Friday and didn't bring it back home with her this weekend. I'll get those pictures as soon as I get the camera back.   P47b Posted on Sunday, April 20, 2008 - 08:31 pm:        Just trying to get some ideas for tag locations. What would work the best. I am wanting to start making these.   Firebolt32 Posted on Sunday, April 20, 2008 - 08:39 pm:        I was trying to use that same idea but went with this... I chopped the sides off.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: