G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Quick Board Archives » Archive through November 01, 2007 » Timing/Cam Position Sensor question « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Sanchez
Posted on Sunday, October 28, 2007 - 05:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I retarded the timing on my Uly today to cure its pinging, and I'm wondering two things. First, just how far did I retard it? Is each tick on the CPS plate 1 degree of timing, or is there some other scale?

Second, was my timing out of spec? Does the triangular opening show where the CPS should be positioned from the factory? It seems to me that the triangular hole really should be lined up with the triangular tab behind it, but maybe that's not the case.

Top of pagePrevious messageNext messageBottom of page Link to this message

Ducxl
Posted on Sunday, October 28, 2007 - 05:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'm a little surprized it IS possible to adjust timing.I'm sure,in some way it affects the FI.As far as if you've affected timing,just attach a timing light and remove the plug between the cylinders and view the timing with the light to see the effects of adjustments made.Oh,wait,is there even a window anymore? FI rally complicates that adjustment now
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Sunday, October 28, 2007 - 06:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The triangular hole is there to help you tweak the plate with a flat bladed screwdriver.
More precise than poking the plate directly.
Top of pagePrevious messageNext messageBottom of page Link to this message

M1combat
Posted on Sunday, October 28, 2007 - 07:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Looks to me like you moved it about 4 degrees...

Probably too much.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sanchez
Posted on Sunday, October 28, 2007 - 08:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ducxl, yeah, the static timing is the same for the FI Buells. I can't just run the bike with that plug out, can I? The service manual says there's something else that goes in there. I'm guessing it's just another plug with a glass center or something.

Natexlh1000, well so much for my brilliant triangle alignment theory!

M1combat, so one of those little ticks on the dial is about 4 degrees? I hadn't planned to fiddle with it anymore, but if the difference is that dramatic, I may advance it part way back again.
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Sunday, October 28, 2007 - 10:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

You can run it with the timing plug out but you will get facefull!
They have timing plugs that are made of clear plastic.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sanchez
Posted on Sunday, October 28, 2007 - 11:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Someone posted this related link in my Big, Bad & Dirty thread: http://www.badweatherbikers.com/buell/messages/142 838/206755.html

"each millimeter is equivalent to 3 degrees of spark timing"

So it looks like I took out about 3 degrees. Maybe I will fiddle with it a bit more and see if I can push it back up higher.

Someone else also mentioned that the sight glass timing plug is only a few dollars from the dealership, so maybe I'll pick one up and see how it looks under the light.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration