| Author | Message | ||
     Buelltilicious |
Has anyone used these risers? http://www.roxspeedfx.com/cgi-bin/cart/showitems.cgi?subcat_id=268 If you have used these let me know how it worked out (Message edited by buelltilicious on August 15, 2007) (Message edited by buelltilicious on August 15, 2007) | ||
| Tzippria |
I have talked with Blake and we worked out a deal. Look for another thread soon regarding this issue. I look forward to hearing what you have to say. Thanks to everyone who commented, and thanks to Blake for being so cooperative. | ||
| Glitch |
Congrats Tzip! I knew things could be worked out. They usually do. | ||
| Aeholton |
Has anyone used these risers? I remember some fellow Uly owners were talking about them back about 6 months or so ago. Do a search of the Big, Bad & Dirty section for Rox Risers. Should find a thread or two. | ||
| Old_man |
I installed the 1" risers from Precision Engineering on my XB9S -- Any higher rise would require a change in the clutch cable and lengthening the brake line. The 1" rise is enough for me. A longer rise may be possible on your bike without any change. From the pictures of the risers you are asking about, they look like a great idea., but I would check to see how much slack you can get out of your lines, before deciding. | ||
| Blake |
Tom's banner is fixin' to be up and running. Thank you Tom. Feel free to advertise your survey at will.  | ||
| Buellinachinashop |
I'm interested in a possible 1" rise. Could somebody please post images of their work? |
