Author |
Message |
Smokedaddy
| Posted on Sunday, July 08, 2007 - 06:15 pm: |
|
My S3T is in excellent condition, especially when you consider where it has been throughout the country over the years. It looks as good as the day I purchased it, hopefully it will run too once I get everything back together. One problem is the seat latch. If you review the pictures here you can clearly see how the pin has dropped down inside the lock. I have no idea HOW to fix this problem. Any help would be appreciated. Purchasing a new one is fine with me as long as it works as it should.
-SD: |
Iamike
| Posted on Sunday, July 08, 2007 - 10:42 pm: |
|
At least your arm is still attached, mine fell off about a year after I bought it. It was too torn up on the brass pin to reuse. I just figure most people wouldn't know how to remove the seat anyway. |
Smokedaddy
| Posted on Sunday, July 08, 2007 - 11:15 pm: |
|
Any help here guys would be appreciated! -SD: |
Smokedaddy
| Posted on Monday, July 09, 2007 - 11:10 am: |
|
Bump ... |
Iamike
| Posted on Monday, July 09, 2007 - 07:54 pm: |
|
Have you tried a locksmith? I bet that a circlip slipped or something. |
Smokedaddy
| Posted on Tuesday, July 10, 2007 - 11:29 am: |
|
Hi Mike, Nope ... I thought there was a fix for this but it has been so long ... I have forgotten about it. Just thought some of the old tube frame guys would know. -SD: |
|