G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Bulten Posted on Sunday, May 28, 2006 - 11:57 am:        Hello, Did just replace oil seal and dust seal due to leakage. Everything went fine unt'll mounting the front wheel. Then I saw that the left slider fork was sticking out longer from the outer tube. WTF?? Somethings not right, i guess that the spring joint hasn't slipped in to the spring jet and causing the trouble. QUESTION: How long are the visual part of the slider fork runout suppose to be when mounted? XB9s -03 Mine are. Right (Rotor side): 136mm Left: 144mm Measured just above the dust seal and down to where the "fork runout" ends. Hope you can understand mine crappy english. Thnx/Anton (Sweden)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: