G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Spiderman Posted on Sunday, April 02, 2006 - 03:39 pm:        I need to borrow one, all applicable rental fees and shipping will be taken care of by me! Thanks!   Swampy Posted on Sunday, April 02, 2006 - 03:55 pm:        I'm claiming brain Fart! (Message edited by swampy on April 02, 2006)   Spiderman Posted on Sunday, April 02, 2006 - 04:03 pm:        The one for the front drive sprocket...   Bluzm2 Posted on Sunday, April 02, 2006 - 06:14 pm:        Spidy, You shouldn't need a puller for the front pulley. Remove the locking plate, remove the big nut and it should pull straight off. I've removed a number of them with no problems (other than the big nut being a bugger on one of them). Brad   Phat_j Posted on Sunday, April 02, 2006 - 06:24 pm:        he's not looking for a puller, but a locking tool so he can spin that nut off as it should be done with red locktite.... if i had one, i'd get it to ya, but i dont....   Spiderman Posted on Sunday, April 02, 2006 - 06:29 pm:        Thanks Phatty, I just bought one so ifin ya need one now I do LOL I found one for cheap VS. the 100+ some places wanted!   Jugallo94 Posted on Sunday, April 02, 2006 - 09:29 pm:        Hey spidey how is the new house goin.   Shadowracerx1 Posted on Monday, April 03, 2006 - 10:30 am:        I'll need one for my reassembly   Bluzm2 Posted on Monday, April 03, 2006 - 01:49 pm:        Man, did I read that one wrong!! Spidy, where did you get yours?   Phantom5oh Posted on Monday, April 03, 2006 - 03:26 pm:        I ordered mine from Daves... Should be here in about a week or so... I think it was about $45...   Jayvee Posted on Wednesday, April 05, 2006 - 12:48 pm:        American Sport Bike has the Primary Locking Bar for about $21. Shaped like a flat chisel, pointed on both ends? I tried to post a link but it won't post, it's in the Engine section, not the Tools section.   Aaomy Posted on Wednesday, April 05, 2006 - 01:41 pm:        hey when one of you guys gets you tool in could you post a picture for me,, it would be greatly appreciated,,   Phantom5oh Posted on Wednesday, April 05, 2006 - 04:04 pm:        Look on the American Sportbike website in the Buell Category under the engine section like Jayvee said. Pretty good picture there.   Al_lighton Posted on Thursday, April 06, 2006 - 01:14 am:        looks like this: THE American Sport Bike store works funny....if you navigate to it hierachically, you can't post the link. But if you search for it, you can. So for instance, if I searched for "locking bar", it shows me the search results. Clicking on the one of interest, then copying the URL, yields: http://www.americansportbike.com/shop/cgi-bin/cp-app.cgi?usr=51F5689924&rnd=4531 307&rrc=N&affl=&cip=69.160.135.44&act=&aff=&pg=prod&ref=16075&cat=&catstr= Al

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: