| Author | Message | ||
     Hammer71 |
Dude.. these gloves rock. thirty some odd degrees at 90+ on way home and I can feel all my fingers. Might have to go buy a set tomorrow. | ||
| Mikexlr650 |
very cool! jt's shop has 'em on the rack. had an idea, if the battery was low to begin with could that have affected the reset and caused the erratic return numbers. just checked it, almost two hrs on the charger and it's still red light. that battery must have been quite weak! | ||
| Jandj_davis |
And what gloves are we talking about guys? | ||
| Hammer71 |
tag on them says Joe Rocket dry tech. Fellow board member opened a shop and sells them for $40. Seems to be a great deal. | ||
| Buell12hundo |
is that fellow bad weber jerseythunder | ||
| Jamhamm |
dry tech is in most of joe rocket's incliment weather gear.. boots, jackets, gloves, etc... we have the make: joe rocket whats the actual model of the glove? not that it's going to matter much here soon - i do believe spring has finally sprung 65+ and rainy here [kansas city] today the future looks warm and wet for the next few weeks -sau | ||
| Hammer71 |
Hundo.. you are correct. Have no clue what model they are XLR should pop in here and let ya know either that or jersey thunder could fill ya in as it's his shop they were bought at. | ||
| Jersey_thunder |
YO, JOE ROCKET "RUSH" GLOVES.. JT | ||
| Mikexlr650 |
rich, started right up with a good charge! definitely needs to be reset again though, throttle response is way off. when we initially ran it on the lift is the only time it has ever run crisp off the bottom. i think your hunch is correct that it has never been set correctly due to the binding in the cable. thanks again for takin time out to work on it for me, that tps procedure would be a pia first time through! | ||
| Jersey_thunder |
Mike, you put the kit on? JT (Message edited by JERSEY_THUNDER on March 30, 2006) | ||
| Hammer71 |
mike .. let me know when I can come over and set clear it up. Tony.. kit put it on for him yesterday but due to low battery voltage couldnt get at true voltage setting. rip roaring ass tearing to come. | ||
| Mikexlr650 |
should be done early today, call ya when we finish the job. jt, kit is on, love the sound! thanks for findin the mirrored shield. | ||
| Niceharleystuff |
Hi Guys... Long time no see. Now that we are getting some nice weather, I am looking forward to my Sunday morning rides up 301 to Bear Mountain! Hopefully we can all get together soon for a ride. If you guys want to get your bikes on the Dyno to test out your new additions, we will be doing Free Dyno Runs at the Cruise Night on Thursady, April 27th. Jeff | ||
| Mikexlr650 |
jeff, what do you charge for a dyno run on a normal day, curious what my bike puts out. mike | ||
| Hammer71 |
one million dollars for you. | ||
| Jersey_thunder |
1) put kit on 2) dyno run sounds like a plan.... jt | ||
| Mikexlr650 |
nice hammer, saw that pic of you in the paper scaring that cute little teacher half to death. looked like a good time was had by all. | ||
| Niceharleystuff |
Mike, Sorry for the delay replying to your question regarding Dyno time pricing. I spent all weekend out on my S3T and I took yesterday off to do my taxes. We do not have a set price for Dyno runs. We charge our regular labor rate for however long the tech is working with your motorcycle. Give me a call if you need more info. Jeff |
