G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Quick Board Archives » Archive through July 28, 2005 » 97 S1 rear tire change « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Nemster
Posted on Tuesday, July 26, 2005 - 01:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

How hard is it to change a tire? How difficult is it to remove the wheel to have it changed? Also, will a 200 fit on a 97 S-1 rear?? Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Tuesday, July 26, 2005 - 07:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Removing a tyre from the cast wheel without a tyre changing machine, that means using tyre irons instead, will almost certainly mark the paint and possibly damage the alloy surface of the rim if you've not removed a tyre before. Likewise you'll do the same sort of damage if you have the PM alloys.

Remove the wheel and have the tyre changed by machine but first buy the manual. Removing the wheel is as simple as undoing the nut and withdrawing the spindle. Pay attention to how the nuts washers and spacers locate and the location of the brake caliper. The manual shows this clearly and it also shows how to install the wheel. Make sure when you put the wheel back in you locate the disc brake pads over the disc brake rotor. DON'T at anytime whilst the wheel is removed operate the rear brake. Now check \ adjust as necessary the tension of the drive belt.

You cannot fit a 200 section rear tyre safely to the stock rims on a 97 S1. Your options come down to a realistic 185 / 55 x 17 or 190 / 50 x 17 if you have the wider 5.5 inch PM alloys. Read the BadWeB archives and \or seek professional advice.

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Nemster
Posted on Wednesday, July 27, 2005 - 01:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I am not sure which wheels I have. I think PM's but still unsure. Whats the difference other than the width? I decided to just put on what size tire I take off (170/60 17). The whole reason for the change is that I noticed there are 2 plugs in the rear tire and I just want to be safe. I can't seem to operate through the archives as easily as I can the Quick board.Thanks!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Rocketman
Posted on Wednesday, July 27, 2005 - 05:34 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The PM's are flat spoke polished alloy. The stock wheels are three round spoke alloys which I imagine will be painted grey.

If you're running PM's I think you'll find that a 170/60 x 17 is too small but please take professional advice not just my word.

Email admin about your browser issues.

Rocket
Top of pagePrevious messageNext messageBottom of page Link to this message

Nemster
Posted on Wednesday, July 27, 2005 - 01:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

They are the smaller stock rims and are grey. 170/60 17 is what is on it now.

I don't really have browser issues, its just this seems to be easier (quicker) if you will. Thank you!!
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration