G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Quick Board Archives » Archive through June 28, 2005 » X-1 still not running right « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tom_b
Posted on Sunday, June 26, 2005 - 11:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Broke the shaft on the throttle body about 3 weeks ago, replace whole throttle body and throttle cable. Ran like crap, bought a program to reset tps and all the stuff. Ran great for one day and has progressively ran worse.On full throttle sounds like leaning out or hitting rev limiter about 4grand. slightly back off throttle is ok. has gotten so i can't run half throttle above 4 grand without cutting out. Is this mechanical or computer. replaced plugs, looked they were rich. I have a race ecm and rizoma race air filter. It did fine till all hell broke loose with throttle body. am i missing something?
Top of pagePrevious messageNext messageBottom of page Link to this message

Odinbueller
Posted on Sunday, June 26, 2005 - 11:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

If you're not tripping any DTCs (engine light on?), check to make sure you do not have an intake leak.
Top of pagePrevious messageNext messageBottom of page Link to this message

Prez
Posted on Tuesday, June 28, 2005 - 12:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

my bike was stalling and popping awhile back,and i just took some powertron and cleaned the air flow sensor and all my electric connections..worked like a charm for a few days...prolly woulda kept workin had that damm 16 yr old not pulled in front of me,resulting in a laydown...prez
Top of pagePrevious messageNext messageBottom of page Link to this message

Jayb
Posted on Tuesday, June 28, 2005 - 06:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

How'd you clean the air flow sensor?

-Jay
Top of pagePrevious messageNext messageBottom of page Link to this message

Tom_b
Posted on Tuesday, July 05, 2005 - 12:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

How do you clean the air flow sensor? I reset the Tps the DTS and the airflow with the software that I have. After the third try, the problem cleared up. took a 30 minute ride and it ran great for about 20 minutes, now back to the same problem. took it home went thru all the reset again and after 20 minute ride back again. What's the problem, does not seem to be an intake manifold leak, possibly one of the sensors?
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration