G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Garrett1998s1 Posted on Saturday, May 28, 2005 - 07:31 am:        Any suggestions on the best way to cut down my carbonfiber rear fender? Precautions? Any ideas would be appreciated.   Buelliedan Posted on Saturday, May 28, 2005 - 08:03 am:        put masking tape on both sides of the area you are going to cut. Use a Dremel tool with the ceramic cutting discs. This combination will give a very nice clean cut.   Smoke Posted on Saturday, May 28, 2005 - 08:37 am:        wear a mask, the dust is bad for your lungs, real bad!   Djkaplan Posted on Saturday, May 28, 2005 - 10:07 am:        Wear saftey glasses, too.   Timbo Posted on Saturday, May 28, 2005 - 11:02 am:        And a jockstrap with a cup. (just kidding, sheesh)   Garrett1998s1 Posted on Saturday, May 28, 2005 - 03:00 pm:        lol going to have to go out a buy me a jockstrap I guess.   Cruisin Posted on Sunday, May 29, 2005 - 11:40 am:        Just don't get everything confused and wear the jockstrap as a mask...or at least make sure it's not used...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: