G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Barn_buell Posted on Friday, June 19, 2020 - 03:13 pm:        I've mentioned that I was planning on manufacturing SS pistons for the caliper on the early buells with the 6 piston Performance Machine caliper. It took a lot of research and planning. The retail cost would be around $150.00. That's for a complete set in 303 SS. Does anybody want a set? I tried to get the cost lower but with the tolerance required it comes in a little high. (Message edited by Barn_buell on June 19, 2020) (Message edited by Barn_buell on June 19, 2020) (Message edited by Barn_buell on June 19, 2020) (Message edited by Barn_buell on June 20, 2020)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: