G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mighty_mouse Posted on Sunday, July 28, 2019 - 11:04 am:        When I push on it to check belt deflection it squeaks. Is it time to change it before it tears or is there a spray (like silicone) I could use to lengthen it's life or quiet it some? No sign of dryrot/cracks. TIA   Two_seasons Posted on Sunday, July 28, 2019 - 12:39 pm:        I had a squeak that occurred from 0-20 and from 20-0. I thought the same thing...belt. Turned out to be a worn out front sprocket. With a bright light, deflect the belt side to side and see if your belt's front sprocket is walking around on your final drive shaft. You'll need to lift your rear wheel off the ground. Nice X1. Used to live southeast of you and I know all about SR555!   Ebutch Posted on Sunday, July 28, 2019 - 01:22 pm:        Out-put shaft of trans striping out belt font sprocket. The wobble causes Squeak.   Williamscottrobertson Posted on Tuesday, July 30, 2019 - 03:12 pm:        Jim’s MegaNut fixes it. There’s a solution on eBay that’s a good bit cheaper. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F332677583050

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: