|Posted on Friday, April 19, 2019 - 02:16 pm: ||
I have a Ď96 S2 that Iím slowly getting back to roadworthy shape. When I got it, the speedometer drive unit was trashed and the cable was missing.
I have replaced both with new parts.
Hereís the rub - I was pushing the bike around the garage and noticed that the needle was moving more than it should (5-10mph?). Also, the trip odometer doesnít seem to be working. What triggers the reset?
Think I need a new speedo? Iíd rather get a new one before the old one eats the new parts.
|Posted on Friday, April 19, 2019 - 03:46 pm: ||
There is a small cable in the back of the speedo that resets the trip odo when you spin the knob.
|Posted on Friday, April 19, 2019 - 09:41 pm: ||
They also made two speedo drives with different ratios. Don't remember what the ratios were but both were for the front wheel speedo drive and mount the same on the hub. since you replaced the drive you might want to make sure you bought the right one.