| Author | Message | ||
     Rz500 |
HELP !!! Does anyone have ECM spyware for an 01 S3T w/race ecm. I don't want to tune, just check and delete codes. My baby shut off on way to work, light came on. After a few tries it started and got me back home. Any help appreciated...... | ||
| Mnscrounger |
The service manual explains a way to check codes without ECM Spy, or HD Scanalyzer. On the Deutsche connector under the seat, there are 4 pin outs. If you jumper two of them,(I THINK its 1-4) with the key off, when the bike is powered up and the run switch flipped on, it will flash the codes on the oil lamp. This method wont clear them, but once you fix the actual problem, I think 50 cycles (key on/start/stop/key off) will clear them out of the memory. If no one else replies with which two of the four pins on the connector to be jumpered, I'll look in the manual tonight when I get home and post it here | ||
| Oldog |
the check engine light flashes | ||
| Rz500 |
Ended up being code 33, fuel pump. Think the plug was not making good connection. See what happens on the way to work tomorrow... Thanx for the help guys.... |
