G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mighty_mouse Posted on Sunday, April 22, 2018 - 10:29 am:        If I recall the S1's should be the same. Does someone have a set laying around that can get the width, height and pullback dimensions? TIA   Mike_lee Posted on Monday, April 23, 2018 - 02:49 pm:        Duno if this helps.... http://www.sideroadcycles.com/AmericanMotorcycles/ Handlebars/Stock_Bars.html   Mighty_mouse Posted on Monday, April 23, 2018 - 09:11 pm:        Nothing for X1 Mike but did give me the idea to google. Found a pic from twinmotorcycles that gave measurements. That'll at least give me something to go by from my crossroads.   Mike_lee Posted on Tuesday, April 24, 2018 - 05:19 am:        Good deal. least it wasn't a total loss I went thru the same thing when picking out bars for my s1. I used that sheet as a base cuz it kept me in the ballpark so to speak. I ended up with some Renthals 755 (med bend)and 1" risers that I found to be nearly identical to my x1 setup.(The x1 has risers too).

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: