|Posted on Tuesday, January 02, 2018 - 06:36 pm: ||
2000 thunderbolt S3 want to try drag racing.
Need to tap in the kill switch wire for a break away switch.
4 wires are visible just before going into the switch. Looked for a wiring diagram
Need the color of that wire.
Open to any other suggestion.
|Posted on Wednesday, January 03, 2018 - 12:13 am: ||
Didn't do this on a buell but what I have always done in the past is make a short extension harness for the side stand switch, then you don't need to cut or tap any wires.
|Posted on Wednesday, January 03, 2018 - 01:12 pm: ||
That's a great idea, I'd been thinking of putting one on mine. I will now thanks
|Posted on Wednesday, January 03, 2018 - 06:24 pm: ||
Yeah thanks for the tip I will try that and I'll let you know how I make out.
Bradenton FL drag racing January 6th.
|Posted on Wednesday, January 03, 2018 - 07:44 pm: ||
I'll try to get back to you soon, its been a while since I put a pingel on my S3 (1999)
More info on your bike?
Mine was mostly chassis mods, but a little in the engine too