G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   12mpghwy Posted on Tuesday, September 26, 2017 - 04:15 pm:        I just recent broke my the engine shift lever part number: T0225.01A1 part number 4 in the attached picture. I might have had the pinch nut too tight but it developed a crack where it pinches the spline shaft and vibrated off leaving me stuck in 1st gear. Though I was able to get it back on and limp home. When I bought the bike it came with the boomerang shifter with a nice milled aluminum part from American Sport Bike along with a cracked factory part. I am looking for something similar but in the style of the newer shifter. I would just machine this part but I wouldn't know where to start when making the spline other than maybe making a broach using cut up and sharpened shift shafts and that would seem uneconomical.   Purpony Posted on Tuesday, September 26, 2017 - 04:18 pm:        this is one for an XB but will work on your bike https://st-paul-harley-davidson-buell.myshopify.co m/collections/lightning-models/products/t0225-02a8 -buell-fuel-engine-shift-lever-all-2003-2010-xb-mo dels-b1q   12mpghwy Posted on Wednesday, September 27, 2017 - 03:01 pm:        Thanks, got one ordered

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: