|Posted on Monday, August 21, 2017 - 05:24 pm: ||
Can anyone with a 98 parts book find a part number/cross reference and or measurement of the 2 grommets that fit on the carbon hugger on an S1?
These are the 2 that fit on the hugger to cushion the hugger on the swingarm, not the 2 well type that secure it near the pulley. Thanks!
|Posted on Monday, August 21, 2017 - 08:11 pm: ||
Those are called "wellnuts" and Home Depot and Lowe's sells them.
Measure the hole size and go get the proper size you need.
|Posted on Monday, August 21, 2017 - 08:34 pm: ||
I don't think he's looking for the wellnuts.
Blackm2... Is this what you're looking for?
Buell C0214.9 (Old 11500Y)
a.k.a. Rubber Grommet #9600K53
• Inside Diameter (A) = 5/16”
• Outside Diameter (B) = 3/4”
• Overall Thickness (C) = 3/8”
• Panel Thickness (D) = 1/8”
• Panel Hole Diameter (E) = 1/2
|Posted on Tuesday, August 22, 2017 - 06:25 am: ||
Exactly Oddalloy, thanks very much!