Author |
Message |
Johnod
| Posted on Sunday, June 04, 2017 - 05:48 pm: |
|
These fit nicely should you be so inclined. http://www.ebay.com/itm/DS-Swingarm-Pivot-or-Headl ight-Visor-Hole-Plug-Chrome-Harley-FLHTC-83-05-07- 10-/332217283876?vxp=mtr |
Upthemaiden
| Posted on Sunday, June 04, 2017 - 11:05 pm: |
|
I'm not entirely sure what size the hole in the frame is, but I'd assume they have a size that would fit... https://www.lowes.com/pd/Hillman-1-5-in-Chrome-Pla ted-Steel-Hole-Plug/3013225 |
Two_seasons
| Posted on Monday, June 05, 2017 - 04:27 am: |
|
Hillman hardware is good too for the "brass nut in the rubber". Seems I cannot remember what they are called! Home Depot has them too. They are used, for instance, to keep your rear fender in place. |
Court
| Posted on Monday, June 05, 2017 - 06:09 am: |
|
Well Nuts |
Williamscottrobertson
| Posted on Monday, June 05, 2017 - 09:17 am: |
|
Take a careful look at the well nuts you purchase. The hillman at lowes I purchased had the right size nut and shank, but the lip/head of the well nut was 1/4" thick vs the 1/8" thick that come on the bike. I went down to Ace Hardware and they had the correct well nuts but about twice as much $$. |
Ebutch
| Posted on Monday, June 05, 2017 - 10:47 am: |
|
I use these stainless https://www.amazon.com/gp/product/B01BPFLNDG/ref=o h_aui_detailpage_o07_s00?ie=UTF8&psc=1 |
Two_seasons
| Posted on Tuesday, June 06, 2017 - 01:56 pm: |
|
Well Nuts...thanks Court... |
|