| Author | Message | ||
     Mhlunsford |
I have been running a DD exhaust on my 2000 M2 and where the muffler attaches to the header seems to be very loose but the clamp is tightened down as far as can go. | ||
| Ebutch |
Are you using a heavy duty clamp like this  a lite clamp just won't do it !!!! | ||
| Brother_in_buells |
Have a good look at it ,something could be cracked or worn out. Have seen it with a micron header pipe that was worn through on one side. | ||
| Bonzai_bucky |
I went through the same thing about 2 years ago, turned out to be a cracked mount under the front hanger, do you hear a weird "tapping" sound at all? | ||
| Mhlunsford |
Took apart and the two ends where missing about half an inch at bottom. I took my old Vance Hines cut the muffler off and made a 4in baffle from packing and screen then drilled two holes and locked it in with a cotter pin. |
