| Author |
Message |
    
Purpony
| | Posted on Monday, May 23, 2016 - 10:12 pm: | 
|
thanks all.
Fits like a glove.
|
Littlebuggles
| | Posted on Tuesday, May 24, 2016 - 12:26 am: |
|
Gorgeous work, are the parts pc'd or hard anodized? |
Purpony
| | Posted on Tuesday, May 24, 2016 - 10:27 am: |
|
powdercoated, since thats something i do myself. I also think it gives a better contrast to the forks that are hard anodized. Plus it matches all the other black parts i have powdercoated as well. If i want i could always strip and anodize later. |
Kmbuell
| | Posted on Tuesday, May 24, 2016 - 06:21 pm: |
|
Really nice work. Are you going to build a bike with all the 3D printed parts.
Be pretty neat.
Kevin |
Purpony
| | Posted on Thursday, May 26, 2016 - 10:47 am: |
|
i was just joking with the guys at work yesterday about 3d printing my entire bike, full scale or scaled for a 3D printing trade show. We want to do something really cool to show off.
here is my "dash" / top clamping ive been working on. It will hold my miniscope speedo, along with all LED indicator lights and 3 mini switches. I dont have pictures of the final piece yet but last night i radiused all the corners and machined a tinted lens. Powdercoating it this weekend and will get to wiring all my LEDs up. They will be held in place with a 3D printed abs insert, along with the switches on the other side. I also need to 3d print a mold and cast the black silicone button pad for the switches.
the risers i made have internal passages with removable side plates to run all the "dash" wiring through, so there will be no visible wires anywhere. |
Purpony
| | Posted on Tuesday, November 01, 2016 - 12:54 am: |
|
got the bike all back together with the new front end, all new custom wiring harness, and a few other odds and ends-
(Message edited by purpony on November 01, 2016) |
Purpony
| | Posted on Tuesday, November 01, 2016 - 12:57 am: |
|
|
Bd3
| | Posted on Tuesday, November 01, 2016 - 08:24 pm: |
|
Beautiful |
|
