Author |
Message |
Firemanjim
| Posted on Thursday, November 05, 2015 - 02:24 am: |
|
I guess I have never been in to an early 99 ecm but did so today. Connected ok and fetched the eeprom--- and it was wacked out like trying to look at a 2008 and later. The rpm and TP columns were not linear as one would expect. Anyone worked with one-- I did load a 2000 eeprom into successfully but have no bike to try it on(bench flashed it) |
Oldog
| Posted on Thursday, November 05, 2015 - 12:44 pm: |
|
Jim Brankin will have to confirm but early 99 ecms were not "re-flashable" according to some thing I read here on Badweb. This was corrected before the YM end IIRC. |
Alfau
| Posted on Thursday, November 05, 2015 - 04:53 pm: |
|
See below for VIN break of vehicles that are equipped with the new calibration from the factory: X1 World after VIN 4MZSS11J7X3202791 S3 World after VIN 4MZRS11J8X3000802 http://www.ebay.com.au/itm/BUELL-X1-S3-DDFI-CALIBR ATION-AND-REMOTE-IDLE-ADJUSTER-KIT-BRAND-NEW-/1811 53094395?hash=item2a2d90dafb:g:C5AAAOxyB0VRrppQ |
|