G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Johnod Posted on Saturday, January 17, 2015 - 11:37 pm:        In the diagram in the link, I'm looking for the part number for part labeled 45. Diagram is labeled 2001, and I'm guessing it's an XB??? Hoping one of you has the book and can look it up for me, thanks. http://www.twinmotorcycles.nl/webshop/artikelen/WM /5F913C78-D3EC-4D93-BFD0-A6FD85C5B4E2.jpg (Message edited by johnod on January 17, 2015)   Phelan Posted on Saturday, January 17, 2015 - 11:59 pm:        Dunno the answer to your question, but I take it you picked up the shifter I linked you?   Mcelhaney14 Posted on Sunday, January 18, 2015 - 05:35 am:        That looks like a M2 or S3 late model shifter. I have the part number for the X1 but that runs a chin fairing and a different bushing. You aren't running a chin fairing, are you?   S1owner Posted on Sunday, January 18, 2015 - 09:56 am:        You can not by those parts seperatly. The shifter comes as a complete kit and are no longer available. i would sugest having one made   Johnod Posted on Sunday, January 18, 2015 - 09:59 am:        Phelan, yes No chin fairing. I guess I get to practice my lathe working, thanks   1313 Posted on Sunday, January 18, 2015 - 10:13 am:        You can not by those parts seperatly. Why not? It was an OE part on later M2's and S3's. Unless H-D has completely pulled the plug on OE parts, it should be feasible. The shifter comes as a complete kit and are no longer available. All accessory kits were dropped by H-D, that is fact. But the individual parts that made up those kits, IF they were OE parts, should still be available. The frame pucks for the XB's is a perfect example of this - the kits been dropped, but last I heard you could still get the individual pucks. i would sugest having one made if the part is truly no longer available through HD. There I fixed it for you. Unfortunately I don't have a late enough tuber parts book to find out the part number though... 1313   S1owner Posted on Sunday, January 18, 2015 - 10:52 am:        I searched for that same part could not get it ordered the complete kit but as far as I know that kit is no longer available. If you want the measurements pm me mines off right now I could get them to you.   Johnod Posted on Sunday, January 18, 2015 - 11:46 am:        S1owner, PM sent, thanks.   Screamer Posted on Sunday, January 18, 2015 - 12:12 pm:        The part number for the shifter bushing is N0614.01A3 A dealer can help by using Parts Locator, which shows they may be available at Vintage Parts and (although dealer inventory may not match what Parts Locator shows) there are supposedly four dealers that have one in inventory.   S1owner Posted on Sunday, January 18, 2015 - 03:28 pm:        Pm replied to let me know if you did not get it   Pash Posted on Sunday, January 18, 2015 - 03:32 pm:        I made some up for a fellow Bueller... http://www.ukbeg.com/forum/viewtopic.php?f=7&t=191 82   Johnod Posted on Sunday, January 18, 2015 - 04:18 pm:        S1owner, no I didn't get the email/PM. Pash, those look good.   S1owner Posted on Sunday, January 18, 2015 - 04:21 pm:        Pm me your email   Johnod Posted on Sunday, January 18, 2015 - 04:28 pm:        Done.   Pash Posted on Sunday, January 18, 2015 - 04:40 pm:        Let me know if I can help...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: