G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   S1owner Posted on Saturday, January 10, 2015 - 11:55 pm:        Ok so i am runnimg all new lines and fittings. Can I just unbolt the oil pump or what is involved?   Mcelhaney14 Posted on Sunday, January 11, 2015 - 02:19 am:        Just pull the two mounting bolts and it should drop down. Nothing more than that. I would also suggest doing an inspection of the oil pump drive gear if you haven't replaced it with the bronze one.   Brother_in_buells Posted on Sunday, January 11, 2015 - 06:06 am:        Ken ,here is a bit of a how-to from twin, http://www.twinmotorcycles.nl/artikelen.asp?cid=20 &aid=620   S1owner Posted on Sunday, January 11, 2015 - 08:50 am:        Thank you very much. I figured so but I always like to verify. Drive gesr I guess we will see I had it replaced when I had motor work done but did he????   Reepicheep Posted on Sunday, January 11, 2015 - 11:22 am:        Bump the crank and reinspect a few times. The wear can be very asymmetrical.   Mhlunsford Posted on Sunday, January 11, 2015 - 01:35 pm:        You can change the lines without dropping the pump. Check the manual for the routing to be safe.   S1owner Posted on Sunday, January 11, 2015 - 02:25 pm:        Not for what I am doing   Charlies_s1 Posted on Sunday, January 11, 2015 - 08:37 pm:        Nice Ken, Do you have the part numbers for the fittings?? Looks very clean.   S1owner Posted on Sunday, January 11, 2015 - 08:43 pm:        I have not purchased them yet. That is Joes bike from Australia but he listed the parts for speed flow which is not in the us but I am cross referencing here is the link to his build and list The best build I have seen http://www.badweatherbikers.com/buell/messages/476 23/263887.html   Bluzm2 Posted on Saturday, January 17, 2015 - 10:31 am:        They are all standard AN fittings. Get them at Jeggs or any other speed shop.   S1owner Posted on Sunday, January 25, 2015 - 06:07 pm:        Ok so need some opinions when installing the fittings into the oil pump should a sealant or tape be used on the threads?   Lynrd Posted on Sunday, January 25, 2015 - 06:33 pm:        yep - teflon tape.   S1owner Posted on Sunday, January 25, 2015 - 06:41 pm:        Thats what I thought thanks   Harleyelf Posted on Sunday, January 25, 2015 - 10:11 pm:        Yellow teflon tape - the white stuff is oil soluble and meant for water.   S1owner Posted on Sunday, January 25, 2015 - 10:45 pm:        Have some of that thanks   S1owner Posted on Friday, January 30, 2015 - 08:44 pm:        Anyone have the gasket part number for HD dealer   Johnod Posted on Friday, January 30, 2015 - 10:13 pm:        HARLEY 26495-89A I believe there is an upgrade number, like the A might now be a B, but this will get you there. (Message edited by johnod on January 30, 2015)   S1owner Posted on Friday, January 30, 2015 - 11:12 pm:        Thank you

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: