G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   S2forever Posted on Wednesday, December 31, 2014 - 12:41 pm:        Does it fit tuber? If not, which I guess so by its different look, why?   Damnut Posted on Wednesday, December 31, 2014 - 02:04 pm:        I believe so. It will be a 29 tooth compared to a 27 that is on the tuber. I just did that to my S3T, I think mine was from an 01 though.   Totalnutah Posted on Friday, January 02, 2015 - 07:51 am:        i used a rear sportster pulley on my x1 the centre hole needed enlarging by 3mm i think   Johnod Posted on Sunday, January 04, 2015 - 08:21 pm:        I've been looking at pics of those too, the bolt circle looks smaller to me, but I don't know.   S2forever Posted on Tuesday, January 06, 2015 - 12:01 pm:        Well, I am talking about secondary sprocket... I figure +04 sprocket won't fit tuber. Will add pic soon to clarify.   S2forever Posted on Thursday, January 08, 2015 - 05:59 am:        This is +04 sportster sprocket. Would not fit tuber.   Lakes Posted on Friday, January 09, 2015 - 04:40 pm:        I don't know the answer but, i would first count the number of splines check offset check what side hole & splines. you can also get 28T

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: