G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Midknyte Posted on Saturday, September 06, 2014 - 12:43 am:        I found a set of grips that I want to buy - they say 7/8" for one and 1" for the other (throttle side)... Is this correct? Or should they both be 7/8" ?   Jayvee Posted on Monday, September 08, 2014 - 11:47 am:        The throttle barrel (twist grip) is a larger diameter than the bar. Otherwise it wouldn't twist   Midknyte Posted on Monday, September 08, 2014 - 02:04 pm:        Thanks. I was wondering if the throttle barrel was larger over the right tube or if the right tube would have been tapered so that the throttle barrel could remain the same outside diameter.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: