| Author | Message | ||
     Duceater |
Hey everyone! I was wondering from those of you who have replaced them, what are you using for your exhaust mount isolators on the rear. I found that this part is not made anymore. There is a little bit of play back there and think its could be contributing to why the front exhaust mount (shoe) keeps snapping. I have followed Buellistic's exhaust installation instructions and it works trouble free for a while, but I think this is the last piece that should be addressed. Thanks! | ||
| Natexlh1000 |
I think American Sport Bike still sells the rubber dingies for the "Z" bracket. Also I seem to recall that hey have replacement old style front hanger rubber dingies. | ||
| Jayvee |
there's supposed to be rubber things in there? I might be missing those too... | ||
| Gusm2 |
Should have rubber isolators with steel sleeves in them, if not that's why your having problems with your exhaust. | ||
| Duceater |
I do have the rubber isolators with the metal bushings. I just think that mine are wearing out. I would expect a much stiffer fit. Mine allow about 1/16" play. I did see them on American Sport Bike's site, but it says its not made anymore. I looking to see if anyone has found another supplier. I measured mine, and they are 7/8" diameter by 7/8" wide. Maybe its time to start searching the Granger website  | ||
| S1owner |
I have some of the stock ones i could part with pm me we can chat | ||
| Lakes |
I'm in Australia, & a year ago i went to a Harley dealer & ordered them with some other parts & they got them, might be old stock they still have? i have had no problems at all with my exhaust mounts. i have Y mount at front & what your describing at the rear . i ride the bike all year round. it has a lot of miles up. | ||
| Duceater |
thank you all for your replies. I think that I'll stop by the stealership first before I try to fit something. |
