Author |
Message |
Fullauto
| Posted on Monday, May 05, 2014 - 05:33 am: |
|
I've got a Forcewinder on my '99 X1. Or I did until yesterday. Now it's trashed due to a low speed fall on the gravel. Anybody know the part number for the K+N filter to suit? |
Pikeben08
| Posted on Monday, May 05, 2014 - 12:12 pm: |
|
RC3680, but it doesn't have the ports for the IAT sensor and PCV line. I routed my PCV to a catch can (it was leaking oil onto the filter which then dripped onto my exhaust). I drilled on a hole in the side of the elbow and mounted my IAT sensor there, but you could just zip tie it up near the snorkel somewhere. Just be careful that it isn't too close to the exhaust or engine. |
Fullauto
| Posted on Monday, May 05, 2014 - 07:25 pm: |
|
Hey, thanks for that. A hole was put in the original one for the sensor. I'll just put it in the same place. the PCV is already taken care of. |
|