| Author | Message | ||
     Impala |
Installing my new muffler. I can not figure out how the muffler mounts to the Y hanger. I have the factory metal bushing and the one from D&D. With either one there is a gap in between the hanger. Feels like I am missing something. Anyone have a picture mounted? D&D instructions are worthless. | ||
| Gmangbl |
hopefully this helps  | ||
| Impala |
It does thanks. Mine lined up in the middle of the hanger even with the entire exhaust being loose. I just modified the spacer setup and all it good hopefully. Thanks! | ||
| Barrick09 |
Might Anyone know where to get the bent pipe that connects the muffler to the headers? Or a good replacement. I've been struggling with broken exhaust problems for a long time and this piece is long destroyed. Been having to use exhaust tubing cut/bent/welded to get anything close to the 90 degree bend needed like above. Thanks! | ||
| 5liter |
Barrick09: You used to be able to get the mid-pipe from D&D. That is the 'bent' pipe you're looking for. Here's a link to American Sport Bike. They might sell just the mid-pipe. http://americansportbike.com/newdir/Item/6172 (Message edited by 5liter on May 05, 2014) |
