| Author | Message | ||
     S1owner |
Post up your ideas and pics I am looking to possibly make a small muffler | ||
| Rocket_in_uk |
  An old one now and a great one off! Rocket in England | ||
| Gianni312 |
Rocket, behind the exhaust, what is the chrome box? Oil tank? Battery box? | ||
| Rocket_in_uk |
Battery box. I saw this bike years ago. Special frame see!  Rocket in England | ||
| S1owner |
Using a stock m2 2.5" header That exaust is nice though. | ||
| Rocket_in_uk |
 Posted these on BadWeB April 2001. Rocket in England | ||
| Gianni312 |
Very sharp! | ||
| Phelan |
I'm actually building a 2-1-2 setup utilizing the stock header. Just waiting on the "mufflers" to get here. They are stainless, open reverse cone megaphones and will be here Tuesday.  | ||
| S1owner |
What cans did you go with | ||
| Phelan |
Two of these!  http://www.ebay.com/itm/271444996243?ssPageName=ST RK:MEWNX:IT&_trksid=p3984.m1439.l2649 | ||
| Phelan |
 | ||
| Brother_in_buells |
Ask someone here for the measurements of a s1 race can and make one of that! | ||
| Jolly |
your design element looks like an exhaust option that is available for new Triumph Thruxtons and Bonnies...yeah... I've got a triumph problem too....(and don't ask about the Moto Guzzi problem) Though the Triumphs don't vibrate as badly as a Buell or produce the torque, you might look at their design element to see how its all tied together. Its a D&D system, here is a link on ebay.. http://www.ebay.com/itm/D-D-Exhaust-04-14-Triumph- Thruxton-Full-System-Dual-Black-Megaphones-w-Jet-K it-/351013439397?pt=Motorcycles_Parts_Accessories& hash=item51ba0807a5&vxp=mtr good luck!! | ||
| Phelan |
Thanks David! Yeah the splitter will eventually be replaced with a custom built splitter similar to the collector, holding the base of the megaphones side by side, but the pre-made piece was bought to save time only, because my wife is hounding me to put something on it to quiet it down.... She might be a LITTLE upset though when I put these on and they do the opposite  . I actually do plan on making some removeable baffles though to make it more bearable on longer trips. | ||
| S1owner |
Heres some I am looking at thoughts appreciated     | ||
| Phelan |
I got the megaphones in today and went straight to work. I cut up the splitter pictured above so I could mount the megaphones side by side. All I lack is building the mount and baffles. This thing is CRAZY loud without baffles lol.  | ||
| Phelan |
Cleaned up a little bit.  | ||
| S1owner |
Ok so I am going with a short supertrapp but I need a stock 90 from a 2.5" header anyone have one? | ||
| Phelan |
http://bit.ly/1hbDTwD Same seller also has one with longer leads if you need a cut-to-fit for $38 shipped | ||
| S1owner |
Found that and it might work any idea what one would call the part that is expanded thatvwould allow the header to slide into it? | ||
| Phelan |
My experience is that the header is just under said size and that standard size pipe will slide over it. That's just my experience with my 2" exit S2 header though. | ||
| Mighty_mouse |
Check into a Midas shop or garage that does exhaust work. They usually have a machine that expands pipe for slip fit. MM |
