| Author | Message | ||
     Reducati |
 i had it welded last year, but it broke, when its 75 degrees  its for my s2, obviously not the boom shifter...dont know what its from, (previous owner) ... if not, do you have a part number..or a cross reference? appreciate it. thanks dan | ||
| Reducati |
looking at ebay, is it an x1 shifter? will any other shifters fit? thanks guys | ||
| Hootowl |
It's a 2001+ S3/M2 shifter. The X1 shifter is longer. | ||
| Reducati |
hoot, i found a x1 shifter,on ebay... by longer, would the two attachment pieces fit? meaning the toe piece would be set back a little further..or would the two attachments pieces not fit. thanks for your help, dan | ||
| Ratbuell |
The piece you broke would be too long, because the pegs are semi-rearsets (further back) on an X1. | ||
| Blu1hockey |
Can u post the link on ebay? I'm looking for an x1 shifter. | ||
| Reducati |
damn....i just wanna ride...it broke in my driveway...but here is the link http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item =251502387862 | ||
| Blu1hockey |
Damn. I have the boomerang and need the whole setup. Thanks for the link. | ||
| Reducati |
i saw several boomerang set ups on ebay...fyi | ||
| Reducati |
here is the ebay link for the boom http://www.ebay.com/itm/BUELL-X1-S1-shifter-lever- w-rod-1997-2002-/390693938069?pt=Motorcycles_Parts _Accessories&hash=item5af72c6395&vxp=mtr | ||
| Blu1hockey |
I actually just got one of those from a user here for 30. But still looking for the aftermarket straight shifter. | ||
| Littlebuggles |
Cut the X1 shifter off just in front of the hole for the tab, then drill and tap the hole for putting that shift tab back on. You can clean the cut off end up nicely with a flat fine cut file. That's how I got the "wrong" kit to fit my bike at a nice discount anyway. | ||
| Mcelhaney14 |
I have one that is slightly bent. Shoot me a message if you still need one. mcelhaney14@yahoo.com Bill | ||
| Mcelhaney14 |
I guess I should say mine is an X1 shifter. Can you measure yours from the pivot point to the toe peg? It looks long for a s3/m2 shifter. I also see it is mounted to the front bolt on the primary where I believe the X1 is mounted on the back bolt. (Message edited by mcelhaney14 on April 13, 2014) | ||
| Reducati |
from very front to toe peg is just short of 9 inches, from the pivot point to the toe peg is just short of 7 inches. (Message edited by reducati on April 13, 2014) | ||
| Hootowl |
Asb has the M2/S3 shifter available, if you want a new one. | ||
| Reepicheep |
Get it welded again, but better this time? | ||
| Mcelhaney14 |
Welding really kills the strength properties of aluminum unless you reheat treat it. Here is a pic of my X1 shifter for measurement reference. So from your numbers I say the X1 piece should work. Like I said, I think I have a slightly bent one around here. How does $20 shipped sound? It's bent a little at the pivot point if I remember correctly.  (Message edited by mcelhaney14 on April 13, 2014) | ||
| Reducati |
mcelhanley...i just sent a pm. i didnt see the price when i sent you the pm, so yea, ill take it.... send me a paypal to my email which is d(dot) doody1 at the hot mail thanks again for your help guys,  | ||
| Reducati |
at hotmail.com |
