G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Schmidt452 Posted on Sunday, April 06, 2014 - 10:56 pm:        So I need to replace the rocker box gaskets on my X1, is there anything I need to know before starting? I have the factory service manual as a guide. I found a set of Accel gaskets are they any good? Thanks for any advice. http://www.ebay.com/itm/Accel-Rocker-Box-Gasket-Ki t-for-1991-2003-Sportster-/110833683089?pt=Motorcy cles_Parts_Accessories&hash=item19ce33ca91&vxp=mtr   Essmjay Posted on Monday, April 07, 2014 - 09:48 am:        You will need to cut down an allen wrench to access the right rear top allen bolt. Other than that, remember to watch the difference between inch pounds and foot pounds.   Lynrd Posted on Monday, April 07, 2014 - 09:52 am:        IF you have to change them anyway, you could consider going to the XB boxes and PCV valves. Or not.   Mikethediabetic Posted on Monday, April 07, 2014 - 09:57 am:        I did mine not to long ago. Its not that bad of a job really. You can get it done in one day by yourself. Just follow the steps ad you will be fine. Also give your local HD dealer a call. They sold me every gasket I needed for much less then anywhere I found online. I was surprised.   Schmidt452 Posted on Monday, April 07, 2014 - 08:04 pm:        Thanks for the info guys!   Bluzm2 Posted on Monday, April 07, 2014 - 09:38 pm:        The new HD gaskets (not so new anymore really) work well. I've used them many times with good results. That being NO LEAKS!   Jolly Posted on Tuesday, April 08, 2014 - 07:29 am:        +1 .... While you're in there... Switch to the XB style rocker box covers and a catch can.... Big difference! Also make sure you get the one piece lower gasket design. And as long as you're in there.... Do your push rod tube bases leak? Perfect time to upgrade to what I found to be an excellent upgrade, easy to install and no issues, worked so well I've done it to three motors now! I've switched to the collapsible pushrod tube covers with billet one piece bases and stock push rods. They work great! Zippers product sold through NRHS... Kind of a "down the rabbit hole" question....   Modified4speed Posted on Tuesday, April 08, 2014 - 10:43 pm:        might as well do a complete xb top ens swap... what year xb 12 top end work anyway I would like to do it myself.   Kalali Posted on Wednesday, April 09, 2014 - 07:29 am:        Why stop there...While you're in there might as well upgrade to a 1250cc and a Baker 6 speed.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: