| Author | Message | ||
     Sgtd |
What all is needed to convert back from a twin tail? My S1W is a twin tail and that seat is too narrow and I don't care for the look. is it just a seat and the plastic tail section or is their more to it? | ||
| Phelan |
that's it, just the seat and tailpiece AFAIK. | ||
| 1313 |
The taillight/turn signal bracket is also different betwixt the 2. But (wait), there might be more, 1313 | ||
| Ratbuell |
Taillight bracket. Its extended for the twin. Pull out the spacer piece and mount the light to the subframe. | ||
| Sgtd |
So,I'm going to have to track down the stock tail section and seat and remove a spacer. I'm going to have my work cut out for me on the seat but the rest is easy. Thanks for the information everyone. | ||
| S1owner |
I have my frame sitting here i can get you pics with measurements and angles pm me if interested | ||
| 505fire |
Sgtd I sent you a PM | ||
| S1owner |
I was told today that yhe twin tail is a bolt on to the standard tail piece? | ||
| Sgtd |
I guess I'll just have to get a hold of the parts to find out. | ||
| Jolly |
its a direct replacement, short tail base for a single seat and a long one for the twin tail. my S1W started life ordered with a twin tail, I converted it as soon as I got it home. easy, nothing to it!, short tail support, short tail, short seat. | ||
| Sgtd |
I was hoping it was that easy. Thanks for the info Jolly. |
