| Author | Message | ||
     Easyrider |
Oke we developed the new style intake seals. Here is our video how to test for intake leaks on your Buell or sportster. (AND YES WE ALSO NOTICED WE FORGOT TO CLEAN THE CAMERA GLASS) We make a new video later. We hope you learn here how to keep your bike in a good condition. http://youtu.be/5MvohPCZazY The intake flanges we developed to prevent the bike from leaking so fast and will keep your bike to run save much longer can be found here: http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&aid=4130&cid=0&s=TMnewflange&a=&aname= Buell_and_Sportster_TM_New_Style_Intake_Flange | ||
| Beardo |
Looking at the pictures you have on your website, correct me if I'm wrong, but it looks like there are two separate o-ring seals, per clamp. Yes? (Message edited by beardo on December 19, 2013) | ||
| Cyclonecharlie |
Looking at pic's in the order section there are two different sizes(thickness)two per cyl. Spent a half hour trying to order the kit and extra o rings and finally gave up.I can't figure the site out.  | ||
| Easyrider |
Beardo, That is correct and they come standard installed with lubricant in the kit we are going to sell. We advice people when ordering for shipping cost to order a set extra. Just in case you need them to have them spare. | ||
| Easyrider |
Cyclonecharlie, There is 1 clamp per cylinder same thickness. There is a front and rear version. You can send me a e-mail dris@twinmotorcycles.nl and i help you with the ordering |
